The Acer Guy Forum » General Discussion
8920G Vista SP2 Install Problems
(7 posts)-
Hi,
First Post!!! Has anyone else had problems installing Vista SP2? I have just purchased an Acer 5536 that installed it fine. My 8920G install OK within Vista, shutdown states it finalsing install, reboot states finalsing and the it fails. Once failed, it rolls back!!
Any thoughts?
Glenn
Posted 2 years ago # -
Also...BIOS version 1.14 and all other updates installed OK. Tried it with Norton AV disabled also!
Glenn
Posted 2 years ago # -
I have not problem on installing Vista SP2 to my 8920G.
When I was installing Vista SP1 I updated my Synaptic driver (which is required at that time due to incompatibility), maybe that's also the issue in your case.I always install the SP though Windows Update. Using that way the SP will not in the list until my 8920G is ready (all requirements are passed).
I have been with Vista SP2 since months ago when it was first released to Windows Update.
Good luck!
Posted 2 years ago # -
Thanks for the advise but no change. At a bit of a loss now realy. May just upgrade to windows 7!
Posted 2 years ago # -
Sounds like it's just a weird botched update. A system restore should fix everything up when you do the update the 2nd time around. Only seen SP2 fail once, it was on a dell system, but a system restore and then re-download of SP2 fixed it.
Alternatively you can try downloading the standalone version of the service pack to see if that makes any difference.
But do make sure your drivers are up to date ;)
Posted 2 years ago # -
Hi Peter, thanks for this. I have puchased Windows 7 now instead but not unwrapped it yet. I have posted on another section but I want to know if W7 will work on the 8920G. Any thooughts?
Glenn
Posted 2 years ago # -
It should work fine. won't find official drivers on Acer's website, just have Windows find them for you. That's what I did. I've got a 5920G.
Posted 2 years ago #
Reply
You must log in to post.